Risk-Free Trial      Online Chat      Contact Us      Blog      FAQs     Call: 800-588-2350      

Setting up your IAX Trunk inside PBX in a Flash

Setting up your IAX Trunk inside PBX in a Flash

This article will help you setup an IAX2 trunk in your PBX in a Flash system and connect it with IPComms SIP trunks..

  • Setting up a IAX Trunk is very similar to a SIP Trunk, the biggest difference in registration is the Register String. The IAX trunk contains more information than a SIP Trunk. Trunk information can be copied over just like setting up the SIP Trunks
Read more

PBX in a Flash SIP Trunk Configuration & Security

Start this tutorial after you have completed PBX in a Flash Setup. After Installation, you will need to obtain your IP Address. Once the IP Address has been typed in you will be able to see PBX in a Flash with the Icons: Voicemail & Recordings, Flash Operator Panel, and MeetMe Conference for users, and FreePBX® Administration, Linux Webmin, and Menu Configuration for the Admin user.

 

Read more

PBX in a Flash (Resetting the root password)

Resetting a root Password

How to reset a root password in PIAF and generic RHEL(Red Hat Enterprise Linux) based systems.

Having the ability to reset your PIAF password in-case of a lock-out is very vital when it's necessary to keep an open communication. Resetting a password may take a few minutes.

    • Reboot your server
    • When you see the GRUB loader quickly press a key to disrupt the normal booting process
Read more

FreePBX EndPoint Manager

EndPoint Manager

EndPoint Manager is a module within FreePBX®, that can be used to install and provision IP phones as well as manage firmware updates. This is a very useful tool that works with the most of the major brands. As an example we will setup a Cisco phone, to begin select Install on Cisco. Next, you will see available models for that brand, select Enable for your current model. Next, go to the Advanced Settings and set the IP Address of the PBX, and set the directory where phones will update the firmware from.

Read more

Setting up your IAX Trunk inside PBX in a Flash/FreePBX

Setting up your IAX Trunk inside PBX in a Flash

  • Setting up a IAX Trunk is very similar to a SIP Trunk, the biggest difference in registration is the Register String. The IAX trunk contains more information than a SIP Trunk. Trunk information can be copied over just like setting up the SIP Trunks
  • Make sure to set the registration string as; username:password@domain
  • If you would like to see if trunks are registered you can go to the FreePBX System Status and look at IP Trunk Registrations.
Read more

Trunk Configuration with PBX in a Flash

Today we will be configuring a Trunk for service with IPComms, to begin we simply copy and paste the information from your registration.

  1. After entering your Trunk Configuration information, click Save Changes.
  2. To check any information you have entered simply go to FreePBX System Status, from here you will be able to see any IP Phones and IP Trunks that are online, as well as some other information about your PBX.
Read more

SIMPLE PBX PLAN:
2 Lines & 1 USA DID for only:

$9.99/month*
Plus taxes & fees


30-Day Money-Back Guarantee